Square drip tray 85x85 cm in resin – Pollice Verde
zoom_out_map
chevron_left chevron_right
New

Drip tray 85x85 cm square for Fenice cube

Square resin drip tray 85x85 cm, shaped on the base of the smooth Fenice 85 cube: it collects excess water and keeps the floor dry.
€76.00 Bianco
€76.00 Tortora
€76.00 Antracite
€76.00 Light grey
€76.00 Bronzantico

€76.00

€62.30 Tax excluded

WE TAKE CARE OF OUR BONSAI
We pack the bonsai in order to guarantee the life of the plant
TRUSTED SHOP
Discover Our Guarantee Up To 2500 €
CUSTOMER CARE
Active Every Day From 09:00 - 18:00

What it is for

It collects the water draining from the holes of the 85 cm smooth Fenice cube, so floors, decking or indoor surfaces stay unmarked. The raised centre keeps the base of the pot lifted above the collecting surface: the roots never sit in standing water, which gathers instead in the perimeter channel. It is a dedicated accessory, not a generic drip tray.

Technical features

  • Square drip tray for Fenice range pots
  • Size 85x85 cm
  • Material: resin
  • Compatible only with the smooth resin Fenice cube 85 cm (SKU CUBOFENICE85)
  • Base with raised centre and perimeter collecting channel
  • Finish and colour matching the Fenice range
  • Suitable for indoor and outdoor use

How to use it

Place it on a flat surface and set the cube on top, centred on the raised section. At least two people are needed, better three, if the pot is already full of compost: the resin holds up well, but the weight of a wet substrate in a cube 85 cm wide is considerable. Decide on the final position before filling it, because a container of this size is not easily moved.

After each watering, check the level of collected water: with such a wide collecting surface the volume can build up quickly. In summer, with frequent watering, it is worth emptying the tray every two or three days, especially if the pot stands in full sun: standing water warms up and becomes a breeding ground for mosquitoes and algae. In winter, outdoors, keep it empty so ice does not push against the walls.

Frequently asked questions

Does it also fit other 85 cm square pots?

No. The mould follows the base of the smooth Fenice cube 85 cm (SKU CUBOFENICE85), including the raised centre into which the pot locks. On a square container from another range, even with the same external size, it would not sit steadily and the rim might not line up.

Can I leave water in the bottom to raise humidity?

A thin film in the perimeter channel raises humidity around the pot without wetting the roots, because the raised centre keeps the base of the cube away from the water. Avoid keeping it full for days, though: in such a capacious tray prolonged stagnation encourages root rot and mosquito larvae during the warm months.

Is the resin frost and sun resistant?

Yes, it is designed to stay outdoors all year round together with the pot of the same range. Two tips: empty it before frosts, so water does not freeze inside the channel, and in summer avoid dragging it when loaded across rough paving, which scratches the surface.

What is included

  • 1 square resin drip tray 85x85 cm for the Fenice range
ELBI
S/FC85/-/Antracite
New
8019742139741
Days of preparation
20
FORM
SQUARE
LENGTH OR DIAMETER
FROM 80 TO 99 CM.
EXPRESS COURIER EU-ZONE
0 a 100 Kg. from 0.35 until 5 € for Kg + Additional fix cost
(depending to your EU-ZONE)
100 Kg > + CONTACT US FOR PRICE
 
Shipping out of Italy will be done with DHL Express Courier in about 4 working days
 
For a precise estimate of shipping price:
 - Add to cart the product.
 - Go to Cart
 - In the bottom of page "Estimate shipping" and put your country, then the website will give you a
   shipping price for your purchase.